NUX NOD-3 overdrive pedaal MORNING STAR OVERDRIVE Bestellen?

Go from Blues-Breaker to Blues-Sky Rocket!

The Morning Star lights up all of the classic aspects of a great blues breaker pedal, but we added something stellar to improve the high-frequencies.

Engage the Morning Star foot-switch to add more overhead with saturated grit to your clean tones, and if you wanna’ boost your high-frequencies to a whole other stratosphere, press/hold the foot-switch to activate the Shine circuit which adds a whole new level of tone brightness.

A Simple Pedal, Loaded with Massive Tone!

0 to 5 on the Drive-Knob yields a balanced overdrive to your clean tone. Tweak it up for thick overdrive with a bit more gain. The tone control has superb tone range from Dark to Morning Star bright. And, whenever you want your blues riffs to light up the skyline, the Shine circuit is always there waiting for your cue to come over the horizon.

You also get 2 bypass options: True Bypass or Buffer Bypass for your essential signal chain needs.

Specifications:
• Input Impedance: 1M ohm
• Output Impedance: 1K ohm
• Power Input: Standard 9V DC, center negative >100mA (power supply not included)
• Weight: 174g
• Dimensions: 94mm (L) × 51mm (W) × 53mm (H)

NUX NOD-3 overdrive pedaal MORNING STAR OVERDRIVE bestellen?

Actieprijs vandaag : 54.89 Euro

Meer informatie >> Naar aanbieder van NUX NOD-3 overdrive pedaal MORNING STAR OVERDRIVE

Naar aanbieder

NUX NSS-5 versterker cabinet en microfoon simulator pedaal Bestellen?

The New Era of Mic-ing!

NUX Solid Studio was created and designed to address: limited gear availability, and the cumbersome transport reality of physical amp/speaker cabinets.

NUX is proud to introduce the new Verdugo series Solid Studio IR & Power Amp simulator, a pedal version of the most classic amp/cabinet scenarios including microphones and power amp tubes. Over many years of research, Solid Studio was specifically developed to fill the essential needs of discerning musicians and sound technicians, including the art of mic-ing instrument amplifiers on stage or in the studio. Solid Studio provides ease-of-use, reliability, versatility, and, above all, incredible audio quality.

Virtual mic-ing is achieved by choosing 1 cabinet and 1 microphone, and fine-tuning the position of the microphone using the mic position switch. Plus, you can add the tube sound by engaging the power amp simulation.

What’s Inside?

Solid Studio comes with 8 speaker cabinet simulations. All the cabinet models inside the Solid Studio are sounds great as original as the way it feels.

And there are 8 microphone models you can combine with any cabinets. Also, you can adjust microphone position for fine tuning.

Solid Studio Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.

Complete list of the built-in speaker cabinets and the microphones

8 Built-in Cabinets:
JZ120 Roland Jazz120
DR112 Fender Deluxe Reverb 112
BS410 Fender Bassman 410
A212 VOX AC30 212
TR212 Fender Twin Reverb 212
1960 Marshall 1960A 412
GB412 Celestion Greenback 412
V412 Celestion Vintage30 412

8 Microphones:
DYN421 Sennheiser MD421
S57 Shure SM57
U87 Neumann U87
R122 Royer R-122
R121 Royer R-121
C414 AKG C414
C3000 AKG C3000
B52 Shure Beta52

All product and brand names seen on this website are trademarks of their respective owners, which are not affiliated with NUX effects & amplifiers. These products and brand names are only listed on this website to describe the instrument being sampled or impulsed.

Input/Outputs
NUX Solid Studio has 6.35mm mono input with input signal level toggle switch (-10dB / +4dB). And it has 3 outputs; simulation dedicated STEREO OUTPUT and DI OUT, and a bypass “THRU” output.

Connection Tips
Solid Studio offers a variety of connection ways and it can fit any desired spot on your signal chain to use all the cabinet/mic simulations efficient.

Gig Saver
– You can place the Solid Studio at the end of your pedal board, and you can send the simulated sound to the mixer while you can send your original signal to the amp. This connection is very useful if the stage (or studio) and cabinet mic-ing conditions are not good enough.

Silent Connection
– Direct connection to mixer or audio interface for recording. It gives more alternative cabinet options to record your favorite amplifier sound, especially if there is no chance to use any loudspeaker.

Advanced Connection
– You can place the Solid Studio between the amp and the cabinet. You can send the loud signal from the amp’s cabinet output to the Solid Studio, and you can send the original signal to the cabinet, simulated signal to the mixer/audio interface.

WARNING
When you use the advanced connection method:
The amplifier’s speaker output must be connected to the Solid Studio’s input by a SPEAKER CABLE
The Solid Studio’s THRU output must be connected to the speaker cabinet’s input by a SPEAKER CABLE
The Solid Studio’s output mode must be selected as SPK (SPEAKER)

Impulse Response (IR) Loader

You can easily emulate the sound of any guitar cabinet by loading different IRs (Impulse Responses) to NUX Solid Studio. The internet is a huge library and you can find many different IR’s (both paid and free). And you can add into Solid Studio to use whenever you want. (Currently, we are developing a software for Solid Studio and there will be more information soon)

Technically, the Most Realistic IR Loader: Solid Studio

Solid Studio’s IR resolution is 2048 samples and 46ms . When talking numbers, IR quality is “measured” with the sample resolution, and it’s “scaled” with ms (milliseconds). On this calculation, 1024 samples equal to 20ms capturing length which is currently the respected standard in the market. The best-known and respected profiler gear offers 2048 samples / 40ms length. The highest IR resolution quality or “limit” is 50ms. Unfortunately it doesn’t yield a realistic sound, and what we’re going after is the “real sound!”

So, what makes the Solid Studio unique? It offers 46ms length which means it can perfectly bring back all of the frequencies (including the elusive low-ends). Regarding length, 20ms is certainly capable of capturing a sound profile with an efficient result but it’s not enough to catch the lower frequencies. That’s why high-end IR gear usually provides the 40ms length – it means higher resolution and better quality.

Consider all of the intricate signal-processing that takes place from your guitar to your ear. Solid Studio delivers that signal in the blink of an eye with impeccable accuracy. How? Solid Studio’s high-quality processor / perfect algorithm simply deliver a lightning-fast speed which also limits the signal latency from input-to-output to less than 1 ms.

Why is this so important?

It’s common for IR equipment to have a signal latency coming-in at around 2 ms, and considering that each pedal on the signal-chain lengthens the signal path it further increases the latency. For example: the fastest multi-effect pedal needs 2 ms to deliver the sound, if you add “average” IR equipment to the equation, the latency will be 4ms, that’s ~barely~ workable for a guitar player. If it’s more than 5 ms it’s simply too slow and it’s basically unusable. Less than 1 ms is pretty darn awesome 😉

IR Capture

You can capture any of your favorite amplifiers sound and create your own IR file by Solid Studio. Place the microphone to the front of the speaker and adjust the capturing position as you desire.

How to capture and create an IR file:

– Hold both foot switches, and plug-in the power cable. IR Capture mode will be activated.
– Make the connections between the Solid Studio, amplifier, microphone preamp and the microphone. (Check the IR Capture connection figure above)
– Choose a preset where you want to save your own IR file. (8 cabs * 3 mic positions * 8 mics = 192 patches)
– Press “Cab” foot switch, this will send the impulse signal and it will run from power amp to the speaker. Then your microphone will capture the impact sound and send the signal to the Solid Studio’s input.
Your very own IR file is ready to use.

Important note: Update the Solid Studio firmware for using the IR capture function.

NUX NSS-5 versterker cabinet en microfoon simulator pedaal bestellen?

Actieprijs vandaag : 191.39 Euro

Meer informatie >> Naar aanbieder van NUX NSS-5 versterker cabinet en microfoon simulator pedaal

Naar aanbieder

NUX BOOSTCCLX boost pedaal BOOST CORE DELUXE Bestellen?

Boost Core Deluxe is an enhancement gear for your pedal chain

Whether your main choice is an overdrive or distortion, Boost Core Deluxe will be your best gear-mate.
Now you can drive your amp to boost with the Boost Core Deluxe’s gain knob, then sweeten or subdue your treble and bass frequencies with the onboard 2-band EQ. Boost Core Deluxe is handy enough as a standalone boost and an EQ pedal. With its analog circuitry and tone enhancement, Boost Core Deluxe is beyond price. Drive the booster into your favorite overdrive to let it raise the sonic mayhem!

Boost Core Deluxe has all boosted sounds you want.
Boost Core Deluxe is a Booster pedal providing you 3 types of boost modes, Clean, Drive and Spark.

Clean mode is super-transparent +20dB clean boost and it also strengthening the original signal to against any sound degradation.
Drive and Spark mode is +20dB gain boost with wide range parameter control and it offers enough gain for it to work as a drive pedal when turned all the way up.
Equipped with Treble and Bass controls that allow you to adjust your sound and tune the frequency shape anyway you like.

With Boost Core Deluxe;
?You can enhance your signal without any color changes in Clean mode with a tasty compressed sound or you can get additional warm tube sound on Dirt mode. If you want to go further, you can create a sparkling drive sound while you increase the power of your sound in Spark mode.

From transparent, low-gain boost to all-out colored boost, Boost Core Deluxe has all boosted sounds you want. Harmonics will be a bonus while you play with a well-sustained guitar tone. It is recommended first to be used in effect chains.

Specifications:
• Effects: 3 Boost Modes (Clean-Dirt-Sparkle)
• Preset: 1
• Nominal Input/Output Level: -20dBu (Guitar) +3dBu (Max.)
• Input Impedance: 1M Ohm
• Output Impedance: 1k Ohm
• Residual Noise Level: -97dBu
• Current Draw: 4mA (9V)
• Power: 9V DC (Negative tip, Optional ACD-006A adapter)
• Dimensions: 122mm(L) x 72mm(W) x 47mm(H)
• Weight: 251g

NUX BOOSTCCLX boost pedaal BOOST CORE DELUXE bestellen?

Actieprijs vandaag : 59.65 Euro

Meer informatie >> Naar aanbieder van NUX BOOSTCCLX boost pedaal BOOST CORE DELUXE

Naar aanbieder

NUX NFB-2 boost pedaal LACERATE FET BOOST Bestellen?

Lacerate is a mini pedal with a huge boost!

The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don’t worry about what’s under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes.

The 2 Boost Modes:

Clean Boost
In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest “clean boost” pedals available.

Crank Boost
If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge!

Higher Voltage, Increased Headroom & Dynamic

Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic.

WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion.

True Bypass or Buffer Bypass

Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer.
A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass
You can change the bypass mode by turning on the power while holding the footswitch.

Summary:
* True Bypass / Buffer Bypass
* 2 types of boost options (Clean & Crank)
* Dual FET Circuit Design for the most tube-like tone in a transistor design

Specifications:
• Input Impedance: 500K ohm
• Output Impedance: 4.7K ohm
• Working Current: 20mA
• Power: 9V DC (Negative tip, 90mA current draw)
• Weight: 174g
• Dimensions: 94mm (L) × 51mm (W) × 53mm (H)

NUX NFB-2 boost pedaal LACERATE FET BOOST bestellen?

Actieprijs vandaag : 54.89 Euro

Meer informatie >> Naar aanbieder van NUX NFB-2 boost pedaal LACERATE FET BOOST

Naar aanbieder

NUX NAP-5 akoestische voorversterker met chorus en looper Bestellen?

NUX Stageman Acoustic Amplifiers Natural Sound is now in a Pocket Size

Improved Clarity
NUX Stageman Floor is an analog acoustic preamp with digital effects and looper function. Preamp featured with a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter, and input gain control. And it provides a ginormous headroom which delivers the sound all natural.

High-Quality Effects, Easy Control
It equipped with Chorus and Reverb effects and, each effect designed to control by only one-knob, when you tweak the chorus or reverb knob from 0 to 10 it adjusts multiple parameters with a perfect balance. And the chorus switch has another function, while you push and hold, it will activate the freeze effect until you release it.

Notch Filter
You can turn ON the notch filter and adjust the frequency to clean the notch sound caused by a guitar pick or nails

Versatile Preamp
There are Gain and 3-band EQ controls on the pedal. You can adjust the signal power by using the Gain knob. It has Bass, Middle and Treble controls, depending on the amplifier/speaker characteristic, playing style and acoustic guitar’s body type you can tune your sound the way you like.

You can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing. And it has the FX Loop input, you can use a TRS cable and connect any effect unit to Stageman Floor. Its also the best choice for various acoustic instruments like the violin, mandolin, banjo and many more.

Record, Jam, Create!
Push the both Chorus and Preamp footswitches, Stageman Floor turns into a looper pedal with 60 seconds recording capacity and unlimited overdubs. It’s ready-to-jam at anytime, anywhere!

In Looper mode:
Preamp Footswitch controls the looper functions; Record/Play/Stop and Overdub
Reverb Knob controls the Loop volume level.

Features:

Input Gain Control
3-band EQ (Bass, Middle and Treble)
Middle Frequency Scoop Toggle
Notch Filter ON/OFF Toggle Switch with Precision Adjustment Control
Effects: Chorus, Reverb and Freeze
Input Optimization Toggle for Piezo or Magnetic Pickups
60 Seconds Looper
XLR DI Output
1/4″ TRS Send / Return Inputs
1/8” Aux-in
1/8” Headphones Out
USB Input for firmware updates (Micro B USB 2.0)

NUX NAP-5 akoestische voorversterker met chorus en looper bestellen?

Actieprijs vandaag : 159.69 Euro

Meer informatie >> Naar aanbieder van NUX NAP-5 akoestische voorversterker met chorus en looper

Naar aanbieder

NUX NBP-5 basgitaar voorversterker “Melvin Lee Davis Signature” met D.I. Bestellen?

Designed by Bassist for Bass Lovers

We collaborated with American bass player Melvin Lee Davis to create MLD Bass Preamp & DI.

“Melvin Lee Davis is an American bass player, vocalist, keyboard player, producer, TV composer and engineer based in Orange County, California. He is the music director for Grammy-award winning artist Chaka Khan and has recorded with The Pointer Sisters, Lee Ritenour, Bryan Ferry, Patti Austin and Gladys Knight & the Pips.”

MLD Bass Preamp + DI has tons of functions based on Melvin Lee Davis’ musical experience. And offers the best sound-shaping controls such as: 3-band EQ with middle-frequency selection, drive with blend control, speaker cabinet simulation (Impulse Response loader) and built-in noise reduction with Decay and Threshold controls.

MLD signature Bass Preamp + DI features fully sweepable mid-range frequencies in addition to Bass and Treble controls. Melvin L. Davis is proficient at 4, 5, 6 and 7 string basses, so MLD Bass Preamp has a wide range of frequency control.

Volume Knob
Adjusts the overall output volume of the pedal. Ideal for fine-tuning the output on clean tone, it also controls the DI output volume.

Blend Knob
Adjusts to blend between the clean signal and overdrive signal. The clean signal remains as unity gain, allowing for fine control of the blend ration.

Drive Knob
Adjusts the Gain level and sets the saturation level in the overdriven signal.

3-Band Equalizer with Middle Frequency Selector
Bass: +/- 12dB @40Hz
Middle: +/- 17dB @160Hz to 1000Hz
Freq.: 160Hz ~ 1000Hz
Treble: +/- 12dB @8000Hz

Specifications

24-bit, 48KHz
Impulse Response: 1024 length (20.33ms)
Latency: 1ms
3-band EQ with Middle-frequency selector
Drive with blend control
Built-in noise reduction
Impulse Response loader, speaker cabinet simulation
1/4″ instrument input
1/4″ through output and main output
XLR DI output
1/8″ headphone output
1/8″ Auxillary in for music player connection
Micro B USB input for firmware update, software control, IR loading, and audio stream

NUX NBP-5 basgitaar voorversterker “Melvin Lee Davis Signature” met D.I. bestellen?

Actieprijs vandaag : 176.65 Euro

Meer informatie >> Naar aanbieder van NUX NBP-5 basgitaar voorversterker “Melvin Lee Davis Signature” met D.I.

Naar aanbieder

NUX NAI-5 Bestellen?

NUX Optima Air is a dual-switch acoustic guitar simulator with a preamp for acoustic and electric guitar players. It simulates the acoustic guitar profiles with the best-optimized sound depending on your guitar and pickup type.

IR loader combined with a preamp which is equipped with 3-band EQ and Gain controls. And there is an additional one-knob-control Reverb effect. If you want to connect any effect pedal you can use the SEND/RETURN effect loop and add the Optima Air into the signal chain.

NUX Optima Air has a unique profile capture function, you can create your own acoustic guitar profile (IR file) by capturing your favorite acoustic guitar’s sound.

There is an XLR DI output for direct line/mixer connection, headphones output for silent play and auxiliary input to connect a music player to play along.

Specifications

24-bit, 48-kHz sampling quality
Acoustic guitar impulse response and pre-amp controls
15 built-in acoustic guitar profiles with IR level control
9 preset slots
Reverb effect
Gain, bass, middle and treble controls
6.35mm (1/4-inch) send/return, effects loop
3.5mm (1/8-inch) auxiliary input
3.5mm (1/8-inch) headphones input
XLR DI out
Micro B USB port for USB audio stream and edit software

NUX NAI-5 bestellen?

Actieprijs vandaag : 178.95 Euro

Meer informatie >> Naar aanbieder van NUX NAI-5

Naar aanbieder

NUX MG-300 gitaar multi effect pedaal – versterker modelling – looper – drum machine Bestellen?

Tiny, compact, powerful, the realistic modeler!

TSAC-HD pre-effects and amp modeling algorithm providing optimum sound response and playability.

CORE-IMAGE post-effects sound library offering you studio sound quality.

User-friendly interface and interactive Quick Tone™ Edit Software.

IR (Impulse Response), USB audio stream (recording interface with re-amp function), and more!

Highlights

TSAC-HD Pre-Effects and Amp Modeling deliver realistic feel and playability.
Core-Image Post-Effects offer you studio sound quality.
Quick Tone™ Edit Software for quickly choosing and tweaking patches.
Load 3rd-party IRs to expand sound ability.
USB audio stream for recording interface with routing setup.
56 drum beats and 60 seconds Phrase Loop Synchronization with Rhythm.
Global 3 bands EQ for quick adjustments in live application.

Specifications:
• Sampling Frequency: 48KHz
• A/D Converter: 32bit
• Frequency Response: 20Hz-20000Hz ± 1db
• THD + N: <0.03%
• Dynamic: 110dB
• Input: -20dB
• Output: -10dB
• Power: DC 9V tip negative
• Dimensions: 230mm(L) x 160mm(W) x 58mm(H)
• Weight: 754g

NUX MG-300 gitaar multi effect pedaal – versterker modelling – looper – drum machine bestellen?

Actieprijs vandaag : 151.40 Euro

Meer informatie >> Naar aanbieder van NUX MG-300 gitaar multi effect pedaal – versterker modelling – looper – drum machine

Naar aanbieder

NUX NOD-1 overdrive pedaal HORSEMAN OVERDRIVE Bestellen?

Two in One Overdrive Pedal
One of the most sought-after dual overdrive pedals produced in the mid ’90s is now in one unique pedal design-with a pocket size. NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.

Gold Mode mimics its classic predecessor; the transparent Gold Centaur overdrive pedal and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur).

NUX Unique Design
The sound is based on the Centaur’s voltage converter circuit. But the Horseman’s characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal.

Clean Boost
Another “classic” way to use the NUX Horseman. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal). And, depending on the Gain – Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

Natural Distortion
Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping ) The “gain” knob is a double potentiometer (a “dual-ganged gain pot”), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs.

True/Buffer Bypass
NUX Horseman has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain. We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain!

Push and hold the footswitch and power-up the pedal; the LED indicator will show which bypass mode is activated; RED – True Bypass / GREEN – Buffer Bypass.

Specifications:
• Input Impedance: 1M Ohm
• Output Impedance: 10k Ohm
• Working Current: 20mA
• Power: 9V DC (Negative tip, 90mA current draw)
• Dimensions: 94mm(L) x 51mm(W) x 53mm(H)
• Weight: 174g

NUX NOD-1 overdrive pedaal HORSEMAN OVERDRIVE bestellen?

Actieprijs vandaag : 74.55 Euro

Meer informatie >> Naar aanbieder van NUX NOD-1 overdrive pedaal HORSEMAN OVERDRIVE

Naar aanbieder

NUX NCP-2 compressor pedaal SCULPTURE Bestellen?

NUX Sculpture Compressor

NUX Sculpture Compressor pedal offers a consistent volume output level and sharpens the signals on top and bottom edges. When you start picking your guitar, it will clean the loud (peak) notes and increase the sustain by raising the level of decaying (quiet) notes. Sculpture also contributes to the signal foundation that’s fed into the rest of your effects chain.

It has 2 clip modes, simply you can switch between “Clean Mode” and “Clip Mode” by holding the switch for 1 second.

Specifications:
• Input Impedance: 1M Ohm
• Output Impedance: 20k Ohm
• Working Current: 20mA
• Power: 9V DC (Negative tip, 90mA current draw)
• Weight: 174g
• Dimensions: 94mm (L) × 51mm (W) × 53mm (H)

NUX NCP-2 compressor pedaal SCULPTURE bestellen?

Actieprijs vandaag : 54.89 Euro

Meer informatie >> Naar aanbieder van NUX NCP-2 compressor pedaal SCULPTURE

Naar aanbieder