Boston TN-21-M Bestellen?

A budget friendly neck to build your own guitar. The neck is made from Canadian maple with a maple fingerboard. A maple cap neck is what was used in the late ’60s and can be found on some custom shop guitars nowadays.

This neck has a dual action trussrod installed so you can set the guitar up for perfect playability. The fingerboard radius of 9,5″ is used in most USA-made guitar necks of this type. It is comfortable and allows for a low action and great playability.
The jumbo frets have been levelled and only need crowning and final polishing.
The paddle headstock allows you to make your own design and stand out from the crowd.

The tuner holes are 10 mm, allowing for modern machine heads. If you prefer vintage type machine heads, you will need conversion bushings. Neck width is 42mm, the width of the heel is 56 mm, conform all standard guitar bodies.

Boston TN-21-M bestellen?

Actieprijs vandaag : 64.00 Euro

Meer informatie >> Naar aanbieder van Boston TN-21-M

Naar aanbieder

Boston SN-21-M Bestellen?

A budget friendly neck to build your own guitar. The neck is made from Canadian maple with a Canadian maple fingerboard. A maple cap neck is what was used in the late ’60s and can be found on some expensive custom shop guitars nowadays. This neck has a dual action trussrod installed so you can set the guitar up for perfect playability.

The machine head hole has a diameter of 10mm. The fingerboard radius of 9,5″ is used in most USA-made guitar necks of this type. It is comfortable and allows for a low action and great playability. The jumbo frets have been levelled and only need crowning and final polishing. The paddle headstock allows you to make your own design and stand out from the crowd.

The tuner holes are 10 mm, allowing for modern machine heads. If you prefer vintage type machine heads, you will need conversion bushings. Neck width is 42mm, the width of the heel is 56mm, conform all standard guitar bodies.

Boston SN-21-M bestellen?

Actieprijs vandaag : 64.00 Euro

Meer informatie >> Naar aanbieder van Boston SN-21-M

Naar aanbieder

Boston TN-21-PF Bestellen?

A budget friendly neck to build your own guitar. The neck is made from Canadian maple with a pau ferro fingerboard. Pau ferro is a high quality fingerboard used on many custom shop guitars. This neck has a dual action trussrod installed so you can set the guitar up for perfect playability. The fingerboard radius of 9,5″ is used in most USA-made guitar necks of this type. It is comfortable and allows for a low action and great playability. The jumbo frets have been levelled and only need crowning and final polishing. The paddle headstock allows you to make your own design and stand out from the crowd.

The tuner holes are 10 mm, allowing for modern machine heads. If you prefer vintage type machine heads, you will need conversion bushings. Neck width is 42mm, the width of the heel is 56 mm, conform all standard guitar bodies.

Boston TN-21-PF bestellen?

Actieprijs vandaag : 64.00 Euro

Meer informatie >> Naar aanbieder van Boston TN-21-PF

Naar aanbieder

Boston PN-21-PF Bestellen?

A budget friendly neck to build your own bass guitar. The neck is made from Canadian maple with a pau ferro fingerboard. Pau ferro is a high quality fingerboard used on many custom shop guitars. This neck has a dual action trussrod installed so you can set the guitar up for perfect playability.

The fingerboard radius of 9,5″ is used in most USA-made necks of this type. It is comfortable and allows for a low action and great playability. The neckof this PN-21 has a nut width of 42 mm, standard for necks of the P type. The machine head hole has the standard width of 18mm.

The jumbo frets have been levelled and only need crowning and final polishing.
The paddle headstock allows you to make your own design and stand out from the crowd.

Boston PN-21-PF bestellen?

Actieprijs vandaag : 75.89 Euro

Meer informatie >> Naar aanbieder van Boston PN-21-PF

Naar aanbieder

Boston SN-21-PF Bestellen?

A budget friendly neck to build your own guitar.The neck is made from Canadian maple with a pau ferro fingerboard. Pau ferro is a high quality fingerboard used on many custom shop guitars. This neck has a dual action trussrod installed so you can set the guitar up for perfect playability. The fingerboard radius of 9,5″ is used in most USA-made guitar necks of this type. It is comfortable and allows for a low action and great playability.

The machine head hole has a diameter of 10mm. The jumbo frets have been levelled and only need crowning and final polishing. The paddle headstock allows you to make your own design and stand out from the crowd.

The tuner holes are 10 mm, allowing for modern machine heads. If you prefer vintage type machine heads, you will need conversion bushings. Neck width is 42mm, the width of the heel is 56 mm, conform all standard guitar bodies.

Boston SN-21-PF bestellen?

Actieprijs vandaag : 64.00 Euro

Meer informatie >> Naar aanbieder van Boston SN-21-PF

Naar aanbieder

Fender 0997003921 Bestellen?

Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style 3-bolt Stratocaster® guitar neck features a comfortable “U”-shaped profile and 7.25″-radius maple fingerboard with 21 vintage-style frets. Although this neck features a 3-bolt design typical of ’70s Strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies.

The synthetic bone nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing, while a gloss urethane finish on the back offers smooth playability.

Features

“U”-shaped neck profile
pau ferro fingerboard with 7.25″ radius
21 vintage-style frets
Pre-slotted synthetic bone nut
Gloss urethane finish
Bullet-style truss rod adjustment

Fender 0997003921 bestellen?

Actieprijs vandaag : 422.30 Euro

Meer informatie >> Naar aanbieder van Fender 0997003921

Naar aanbieder

Fender 0991202921 Bestellen?

Crafted at our Ensenada, Mexico, manufacturing facility, this genuine vintage-style Fender Telecaster® guitar maple neck features a comfortable vintage “C” profile and 7.25″-radius maple fingerboard with 21 vintage-style frets.

The nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish on the back offers smooth playability.

Features

Maple neck with walnut “skunk” stripe
Maple fingerboard with 7.25″ radius
21 vintage-style frets
Pre-slotted synthetic bone nut
3/16″ truss rod nut
Six tuning machine holes designed to fit vintage-style two-screw-mount tuning machines

Fender 0991202921 bestellen?

Actieprijs vandaag : 440.79 Euro

Meer informatie >> Naar aanbieder van Fender 0991202921

Naar aanbieder

Fender 0991102921 Bestellen?

Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster® guitar neck features a comfortable “Soft V” profile and 9.5″-radius maple fingerboard with 21 medium jumbo frets.

The synthetic bone nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing, and a gloss urethane finish offers smooth playability. This replacement neck is the perfect way to give your Strat an authentically ’50s feel.

Features

Maple fingerboard with 9.5″ radius
“Soft V” neck profile
21 medium jumbo frets
Pre-slotted synthetic bone nut
Gloss urethane finish
Vintage-style truss rod adjustment

Fender 0991102921 bestellen?

Actieprijs vandaag : 440.79 Euro

Meer informatie >> Naar aanbieder van Fender 0991102921

Naar aanbieder

Fender 0990063921 Bestellen?

Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Telecaster® guitar neck features a comfortable vintage “C” profile and 7.25″-radius maple fingerboard with 21 vintage-style frets.

The synthetic bone nut is pre-slotted with “pilot” string location grooves to make spacing a breeze when performing the final string slot filing and a lacquer finish offers a vintage feel. This replacement neck is the perfect way to give your Tele an authentically ’50s feel.

Features

Maple fingerboard with 7.25″ radius
Vintage “C” neck profile
21 vintage-style frets
Pre-slotted synthetic bone nut
Lacquer finish
Vintage-style truss rod adjustment

Fender 0990063921 bestellen?

Actieprijs vandaag : 459.20 Euro

Meer informatie >> Naar aanbieder van Fender 0990063921

Naar aanbieder

Allparts LMO Bestellen?

CBS style large headstock replacement neck, all maple construction.

– 21 frets (.079″ X .051″)
– Solid 1-piece maple neck, sanded, unfinished and ready to spray
– 7.25″ radius
– 1-5/8″ nut width
– 2-3/16″ heel width
– 0.340″ Tuning peg hole diameter
– Bullet Truss rod with adjustment at head
– Neck thickness 0.87″ at first fret, 0.96″ at twelfth fret

All necks are made of the highest quality wood in either the United States or Japan. No two necks are exactly the same and may differ slightly from what is pictured. All necks have a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications.

All necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.

Allparts LMO bestellen?

Actieprijs vandaag : 274.39 Euro

Meer informatie >> Naar aanbieder van Allparts LMO

Naar aanbieder