Fender 0998006757 Bestellen?

Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Telecaster® guitar body is routed for a traditional SS pickup configuration and pre-drilled with four screw holes for vintage-style bridge mounting. It’s topped with a gloss polyester finish for added durability on any stage.

This replacement body is for a Fender or Squier® by Fender guitar.
– Alder body
– Gloss polyester finish
– SS routing
– No pickguard mounting holes
– Four-screw vintage-style bridge mount
– Four-bolt neck pocket mount
– Jack retainer clip installed

Fender 0998006757 bestellen?

Actieprijs vandaag : 385.65 Euro

Meer informatie >> Naar aanbieder van Fender 0998006757

Naar aanbieder

Boston JTH-2A Bestellen?

These days finding lightweight alder and ash wood for guitar bodies is getting harder and harder. To prevent ever increasing weights for TE bodies, we decided to make a thinline body without the f-hole. Both treble half and bass side half are hollowed out; a resonant body is the result. 2-piece alder. The edge radius is small, allowing you to rout it out to fit bindings.

Made in Japan by the people who have been making these bodies and necks since the 1980’s. Even though this body is of the highest quality wood, wood is still a natural product and the body you order, may look a bit different than the picture.
The neck pocket may be very tight and may need some sanding to make a snug fit for the neck you will use.

Before finishing this body, it only needs minor sanding.

Boston JTH-2A bestellen?

Actieprijs vandaag : 248.90 Euro

Meer informatie >> Naar aanbieder van Boston JTH-2A

Naar aanbieder

Boston JTH-2S Bestellen?

These days finding lightweight alder and ash wood for guitar bodies is getting harder and harder. To prevent ever increasing weights for TE bodies, we decided to make a thinline body without the f-hole. Both treble half and bass side half are hollowed out; a resonant body is the result. 2-piece alder. The edge radius is small, allowing you to rout it out to fit bindings.

Made in Japan by the people who have been making these bodies and necks since the 1980’s. Even though this body is of the highest quality wood, wood is still a natural product and the body you order, may look a bit different than the picture.
The neck pocket may be very tight and may need some sanding to make a snug fit for the neck you will use.

Before finishing this body, it only needs minor sanding.

Boston JTH-2S bestellen?

Actieprijs vandaag : 387.90 Euro

Meer informatie >> Naar aanbieder van Boston JTH-2S

Naar aanbieder

Boston PBB-50-A Bestellen?

Entry level P-bass body in alder. Alder has been the tone wood of choice since the 1960’s. This body is routed for the typical P-Bass single coil pickup. This body is designed for a top-loader bridge. A top-loader P-bass sounds warmer with more mids. The neck pocket and pickup cavity are tight and may need a small adjustment to fit, This can be done with sanding paper or a chisel.
Prior to finishing, the body will need some sanding

Boston PBB-50-A bestellen?

Actieprijs vandaag : 127.45 Euro

Meer informatie >> Naar aanbieder van Boston PBB-50-A

Naar aanbieder

Boston TEB-50-A Bestellen?

Entry level TE top-loader body in alder. Alder has been the tone wood of choice since the 1960’s. This body is routed for two single coil pickups. The neck pocket and pickup cavity are tight and may need a small adjustment to fit.This can be done with sanding paper or a sharp chisel.
This body is a so-called toploader version. The TE body where the strings are rung through the back of the bridge has a warmer sound with more mids. If you want to use this body in a string-through-body fashion, all you need to do is drill the 6 holes.
The Wilkinson WTB bridges are ideal as top loader bridge.
Prior to finishing, the body will need some sanding.

Boston TEB-50-A bestellen?

Actieprijs vandaag : 113.19 Euro

Meer informatie >> Naar aanbieder van Boston TEB-50-A

Naar aanbieder

Boston JBB-50-A Bestellen?

Entry level J-bass body in alder. Alder has been the tone wood of choice since the 1960’s. This body is routed for two single coil pickups. This body is designed for a top-loader bridge. A top-loader J-bass sounds warmer with more mids. The neck pocket and pickup cavities are tight and may need a small adjustment to fit. This can be done with sanding paper or a sharp chisel.
Prior to finishing, the body will need some sanding.

Boston JBB-50-A bestellen?

Actieprijs vandaag : 127.45 Euro

Meer informatie >> Naar aanbieder van Boston JBB-50-A

Naar aanbieder

Boston STB-50-A Bestellen?

Entry level ST body in alder. Alder has been the tone wood of choice since the 1960’s. This body is routed for a humbucker in the bridge position and two single coils in mid and neck position. The neck pocket and pickup cavity are tight and may need a small adjustment to fit, This can be done with sanding paper or a sharp chisel.
Prior to finishing, the body will need some sanding.

Boston STB-50-A bestellen?

Actieprijs vandaag : 113.19 Euro

Meer informatie >> Naar aanbieder van Boston STB-50-A

Naar aanbieder

Boston JTT-2A Bestellen?

The thinline TE body is another classic that will turn into a great guitar. Alder thinlines have been many peoples favorite since 1968.
Made in Japan by the people who have been making these bodies and necks since the 1980’s. Even though this body is of the highest quality wood, wood is still a natural product and the body you order, may look a bit different than the picture.
The neck pocket may be very tight and may need some sanding to make a snug fit for the neck you will use.
Before finishing this body, it only needs minor sanding.

Boston JTT-2A bestellen?

Actieprijs vandaag : 299.45 Euro

Meer informatie >> Naar aanbieder van Boston JTT-2A

Naar aanbieder

Boston JTE-2A/IB Bestellen?

TE body in 2-part alder. This body has great looking double ivoroid bindings. The coolest guitars are made with bindings on top and back.
Alder has been the wood of choice since the 1960’s for many guitarbuilders and big high quality guitar factories. To have the alder in 2 parts has been the most used combination since the beginning of electric guitars. Even though this body is of the highest quality wood, wood is still a natural product and the body you order, may look a bit different than the picture.
The neck pocket may be very tight and may need some sanding to make a snug fit for the neck you will use.
Before finishing this body, it only needs minor sanding.

Boston JTE-2A/IB bestellen?

Actieprijs vandaag : 223.45 Euro

Meer informatie >> Naar aanbieder van Boston JTE-2A/IB

Naar aanbieder

Boston JJM-2A Bestellen?

JM body in 2-part alder. Alder has been the wood of choice since the 1960’s for many guitarbuilders and big high quality guitar factories. To have the alder in 2 parts has been the most used combination since the beginning of electric guitars. Even though this body is of the highest quality wood, wood is still a natural product and the body you order, may look a bit different than the picture.

The neck pocket may be very tight and may need some sanding to make a snug fit for the neck you will use. Before finishing this body, it only needs minor sanding.

Boston JJM-2A bestellen?

Actieprijs vandaag : 314.85 Euro

Meer informatie >> Naar aanbieder van Boston JJM-2A

Naar aanbieder